So a while back, my girlfriend applied for a research grant from the EPA for a grad school fellowship. At the time, I brewed a beer to commemorate that (guess what style, hyuck); it turned out pretty successful, and became one of my flagship beers, I had the recipe set in extract, partial mash and all-grain, and came up with some pretty similar results across the board.
People would often ask me, "well, what does it have to do with the environment?" I would always have to laugh and say, "nothing at all."
At the time, I had never had an organic beer that tasted as good as a non-organic alternative in the same category, so I had no interest in brewing organic. However, in the interest of trying to make that beer a little more true to the name, I think I am going to try and dip my feet into the organic mash.
Briess malting out of Wisconsin, produces a wide range of excellent specialty malts, and has quite the organic selection. I like local, and I love Briess (for the most part). They supply all of the malts necessary for my recipe, except for brumalt (I used Gambrinus' Honey Malt), for which I will try to use real honey instead (I'm pretty sure all honey is organic, unless they pump steroids into each bee, I will have to research this).
Hops will be a challenge, there are a couple small organic hop growers in the US, but not nearly enough to make them very easily available. I may have to cave on this, I think I can be comfortable doing this, since organic beer didn't need to be made with organic hops (although I remember hearing that the USDA was thinking about eliminating hops from the allowable ingredients for organic beer, last fall. I'm not sure if that passed or not).
With regards to yeast, I am absolutely sure that I want to stay away from "organic," as I would be surprised to hear that many organic brewers use yeast that is not from lab conditions (I think organic would mean putting your unfermented wort in the woods, opening the top, and letting mother nature do her thing).
Either way, if it turns out, my stock recipe for a pale ale will indeed be more environment friendly. I'll post a recipe when I have one made up (or maybe once I think its not going to suck, I've got most of it down already).
Showing posts with label Brewing. Show all posts
Showing posts with label Brewing. Show all posts
Tuesday, February 8, 2011
Saturday, January 29, 2011
BierKrieg Pt 2
So, another batch of Stout Sprinter in the fermenter, OG rolled in around 1.098 this time. Also, the Omnium amber ale rolled in right at 1.055.
I took my time brewing today, with 3 gallon batches, I can pretty much run the mash off from the first one, clean out the tun and start in on the next one while the first is still boiling. If I had done that, I would have saved maybe 2 hours today, but I would have been working my butt off, trying to keep everything on time.
The Rye Pilsner from last week is in a diacetyl rest right now, having just been transferred to secondary. The gravity on that one is reading right on 1.010; I would like to think it would finish out a little more, but I guess with an attenuation rate of 70-74%, that's not bad. Only a little hint of diacetyl, but I've had that before with WYeast 2278, that's what the rest is for. Its got a bit of haze to it right now, I think it will finish out just fine, but since most of my lagers have been bocks, as opposed to piss-clear pilsners, maybe I just haven't seen it before.
Adjusting my recipes to the new brewhouse efficiency has been nice. The amber ale was exactly on target, and I mean exactly, not one or two points off. The Impy stout was a little low, but there is that gravity ceiling for all grain beers, and I'm right at it (some of the gravity points were from Belgian candi sugar, I know, that's kind of cheating)
I didn't get around to kegging my a batch that I have ready, I should really do that. I may get some new gaskets and give the kegs a facelift first.
I will finish this post, as I finish off a bottle of a well-brewed ESB of mine.
"You foam within our glasses, you lusty golden brew,
Whoever imbibes takes fire from you.
The young and the old sing your praises,
Here's to beer,
Here's to cheer,
Here's to beer!"
I took my time brewing today, with 3 gallon batches, I can pretty much run the mash off from the first one, clean out the tun and start in on the next one while the first is still boiling. If I had done that, I would have saved maybe 2 hours today, but I would have been working my butt off, trying to keep everything on time.
The Rye Pilsner from last week is in a diacetyl rest right now, having just been transferred to secondary. The gravity on that one is reading right on 1.010; I would like to think it would finish out a little more, but I guess with an attenuation rate of 70-74%, that's not bad. Only a little hint of diacetyl, but I've had that before with WYeast 2278, that's what the rest is for. Its got a bit of haze to it right now, I think it will finish out just fine, but since most of my lagers have been bocks, as opposed to piss-clear pilsners, maybe I just haven't seen it before.
Adjusting my recipes to the new brewhouse efficiency has been nice. The amber ale was exactly on target, and I mean exactly, not one or two points off. The Impy stout was a little low, but there is that gravity ceiling for all grain beers, and I'm right at it (some of the gravity points were from Belgian candi sugar, I know, that's kind of cheating)
I didn't get around to kegging my a batch that I have ready, I should really do that. I may get some new gaskets and give the kegs a facelift first.
I will finish this post, as I finish off a bottle of a well-brewed ESB of mine.
"You foam within our glasses, you lusty golden brew,
Whoever imbibes takes fire from you.
The young and the old sing your praises,
Here's to beer,
Here's to cheer,
Here's to beer!"
Wednesday, January 26, 2011
BierKrieg
I ended up brewing the Rye Pilsner as described in the previous post, and I have high expectations. Things went off without a hitch; my batch sparging efficiency was great, starting fermentation was great. I also used White Labs new(ish) Clarity Ferm, a clarifying agent that is meant to be added to the start of fermentation. I think I like it, but I guess I won't know until later. If I like this recipe, I'll brew up a 6 gallon batch, split it into two of my 3 gallon fermentors, one with it, one without.
On Saturday, many of us NB folk went out to St Cloud to help out with the new-this-year St Cloud Craft Beer Expo, which was a blast. It seems there was a need for a good quality beerfest/tasting event out there, as we sold out. My numbers may be wrong, but I seem to recall somewhere between 1000 and 1100 tickets were pre sold, and we sold out at the door at 2000 (I think). Guests were mixed between the St Cloud college types (wooo- endless beer!), and more refined folk tasting and discussing the various beverages. Either way, people got drunk and had a blast.
I'm planning a big brew day for this Saturday. I have been researching as much as I can into decoction brewing techniques, and I had originally planned to brew a triple decoction. I will give a brief description below, you can skip reading it if I say big words (its OK, my brain hurts sometimes too).
--Begin Beer Science Talk--
For those not in the know, decoction mashing was a technique used in ye olden tymes, before we figured out how to modify grains for easier starch extraction. Decoction mashing involves holding the mash (your milled grains with some heated water), at a certain temperature for a length of time, pulling the mash out, boiling it, and putting it back in with the rest of the mash to hold it at a higher temperature for a time.
In addition to activating the enzymes (Glucanase, α-Amylase, β-Amylase, etc) to degrade the proteins necessary for fermentation, this method also slightly carmelizes the unfermented wort, bringing out some subtle (unsubtle if you do it wrong) nuances in your beer.
We brewers don't use this method (much) anymore, because 2-row barley is much more modified, increasing the efficiency in starch extraction, making mash steps less important. Mash steps means more heat, and more time, that means your beer costs more, or your local brewer lives in a shanty.
--End Beer Science Talk--
I'm thinking I will postpone the decoction mash until I acquire more equipment, and take some more time to go over my intended recipe. Since I already set aside a big block of time this Saturday for brewing, I think I'll do 2 all grain batches instead.
A friend of mine asked me when I was going to brew my prized "Stout Sprinter" english style (kind of) imperial stout again. To put it in Mozart terms, this beer is my requiem. It has promise to be great, and I've had some already amazing incarnations of it, but I know it can be even better. I've left it alone for some time now, in order to rest myself, and ponder where to take it next, but after a little prodding, I'm ready to try it again. A 3 gallon of that is beer #1.
Next, after thinking about what a moron I was with my "Amber" ale a few weeks back (hey, it was a while since I brewed last, I needed to dust the cobwebs out somehow), I tasted that, and now have my bearing on exactly where I want to go, that is beer #2. I think I'll do a 3 gallon of that too, so I don't end up with fountains of beer everywhere (Side note, I need more thirsty, adventurous friends).
2 mashes, 1 day, that will be my BierKrieg (or maybe Blitzbier is more appropriate, but it just doesn't have the same ring)
Next, after thinking about what a moron I was with my "Amber" ale a few weeks back (hey, it was a while since I brewed last, I needed to dust the cobwebs out somehow), I tasted that, and now have my bearing on exactly where I want to go, that is beer #2. I think I'll do a 3 gallon of that too, so I don't end up with fountains of beer everywhere (Side note, I need more thirsty, adventurous friends).
2 mashes, 1 day, that will be my BierKrieg (or maybe Blitzbier is more appropriate, but it just doesn't have the same ring)
Wednesday, January 19, 2011
Rye Pils
I'm working on a new recipe, which I'll brew this weekend. "Working" isn't quite that accurate, since its not exactly complex.
8lbs Rahr Pilsner Malt
1lb Rye malt (Briess or Weyermann, havent decided)
1oz Premiant @ 60 min
1oz Premiant @15 min
WYeast 2278 Czech Pilsner
I want to do 2 things, use Premiant, which is a relatively new variety, 7-9% alpha acids, with a very low cohumulone (21% I think?), a hybrid from Czech parents of both bittering and aroma, supposedly it has a nice clean flavor profile and a bit of spice to it, the higher alpha acids also means I only have to use 2 ounces, which is a money saver (I don't think I would have gone 3 ounces if I used something like Saaz anyways, but whatever).
The other thing I wanted to do was brew with a bit of rye, which I've never done before. I'm thinking about upping the rye to 1.5 lbs, but its a small malt bill, and I want to keep it that way.
I reinstalled BeerSmith on my computer again. Its a love/hate relationship with this program. Its really the only good brewing program out there, but its from 2003 and the UI makes it look so (it has been updated and is current to 2008, but the UI hasn't changed). I want something web based that does everything this does, but doesn't look ugly and, its web based (I need to get my head out of the cloud).
Having Beersmith installed will really help me adjust my brewhouse efficiency though, which I sorely need to do.
8lbs Rahr Pilsner Malt
1lb Rye malt (Briess or Weyermann, havent decided)
1oz Premiant @ 60 min
1oz Premiant @15 min
WYeast 2278 Czech Pilsner
I want to do 2 things, use Premiant, which is a relatively new variety, 7-9% alpha acids, with a very low cohumulone (21% I think?), a hybrid from Czech parents of both bittering and aroma, supposedly it has a nice clean flavor profile and a bit of spice to it, the higher alpha acids also means I only have to use 2 ounces, which is a money saver (I don't think I would have gone 3 ounces if I used something like Saaz anyways, but whatever).
The other thing I wanted to do was brew with a bit of rye, which I've never done before. I'm thinking about upping the rye to 1.5 lbs, but its a small malt bill, and I want to keep it that way.
I reinstalled BeerSmith on my computer again. Its a love/hate relationship with this program. Its really the only good brewing program out there, but its from 2003 and the UI makes it look so (it has been updated and is current to 2008, but the UI hasn't changed). I want something web based that does everything this does, but doesn't look ugly and, its web based (I need to get my head out of the cloud).
Having Beersmith installed will really help me adjust my brewhouse efficiency though, which I sorely need to do.
Subscribe to:
Posts (Atom)