Wednesday, March 16, 2011

Best bike shop in the city

Today Omnium Bike Shop opened its doors to the public for the first time. 

I was so excited about it, that I rushed off after work over to the shop, forgetting to get gas. This ended poorly, with me on the side of hwy 280. Fortunately one of my trusty cycling friends had driven her car, and was able to bring me to the gas station, saving me a walk along the side of the highway.

I was pleased to hear that I was pretty much on her way home, and also that she was just leaving Omnium, as I was going (busy, busy!).

Finally, I made it to the shop. I've been there plenty of times before, but today was the first time seeing it as it is now, a real bike shop in a great building. Bikes were on display (one of every model they carry), shoes were out, tubes, tires, helmets, all ready to be purchased. It was a great feeling to see the shop look so complete. 

There was tons of people there, new random customers dropping in (the opening wasn't advertised, just a soft one - don't worry, there'll be a grand opening shindig soon). Active cyclists congregated, all happy to see the shop, talk about riding, and ogle the bikes. It was all a really positive experience.

I'm super stoked about riding, and the season in general.

Monday, March 14, 2011

New setup

Its time to spruce up the brewing equipment some. I've got a new 15 gallon kettle, to be used as a mash tun. This will increase my capacity significantly; previously, I was limited to a maximum of 13-15 pounds of grain, enough for lower gravity and alcohol beers, but for bigger beers I had to do 3 gallon batches. a 15 gallon kettle will let me mash 10 gallon batches of big beers even.

To complete the kettle, I also have a fitted false bottom for it, a Blichmann Brewmometer for accurate temperature control, and a ball valve.

Also today, my Autosparge (another Blichmann product, they're great) came in, it was previously backordered. The Autosparge  is the only sparging solution that I really like. This system give you the exact same wort out: sparge water in ratio, whereas others rely on the sparge water in being the best control.

It uses revolutionary toilet tank technology, a stainless steel ball float attached to an arm attached to a valve. Water flows in through a tube, creating a gentle swirling action on top of the mash. You set the valve a certain height off the top of the mash, and as it nears that height, it slows and stops. As the wort drains from the kettle, the sparge arm adds water at the same rate.

To commemorate these new equipment add ons, I've decided to share a photo of my sparge arm installed and ready to go:

Saturday, March 5, 2011

Omnium Racing

A good friend of mine, Dan, is starting a new bike shop. This has been a long term dream and goal of his for a long time, one that we've talked about countless times. We also talked (more like ranted) about the state of racing, as any competitive cyclist does. All of these talks, and my experiences as a race mechanic, official, racer, spectator and general cycling enthusiast, have painted a picture in my mind of how teams can be run. I don't mean to say that there is anything wrong with local race teams, but I've had years to think about this.

Megan and I have been working to organize and start a team along with the bike shop, you'll hopefully be hearing much more about us in the future. In order to build a team with strong values, we broke down all the usual concepts, and looked at what a team was.

As a race mechanic, I worked for a team with a relatively low budget. We weren't pro, so riders didn't get paid, we didn't really have an equipment budget (at least not a huge one), so riders didn't get bikes or wheels or anything like that. But what we were able to offer was management, coaching, a mechanic (That's Me!), soigneur, etc.

Our goal was to do everything within our power so that the athletes only had to think about their upcoming race, being mentally and physically prepared, and performing well (side note, this was always my prime goal as a rowing coach). Bikes worked as they should, riders were given reminders of when they had to be at the start line, we coached and educated them on things that they might not have expected.

Bonds were forged, races were raced, a team was born.

While I can't possibly hope to have that level of support at anything less than the pro/elite level of racing, we are trying our best to capture this essence of "team," from the riders, to the support crew. It will be really exciting to see how, and if, we are able to pull it off.

Things have been a whirlwind lately, Dan an had some bumps and hurdles to getting the shop open, which they have conquered admirably in the short amount of time allotted to them. We couldn't even start in on a team until we were absolutely sure that a shop was going to happen this year. Once we were sure, things became real in an awful hurry, we had to design kits, invite riders, among numerous other tiny but not insignificant details.

Well, this has been a nice break from working on team stuff, time to get back to work, I'll keep you all posted.

In the meantime, be sure to stop in at one of our sponsors, Omnium Bike Shop, and the Cheeky Monkey Deli (more than your average deli, btw), they kick butt.

Sunday, February 20, 2011

Wine and Dessert wine

I've recently started in on making wine, with a Cabernet Sauvignon; right now its sitting at a specific gravity of .998. I'm really excited about making wine, as I've recently been on a trend of trying to make as much as I can (food, beer, wine, crafts, etc) from scratch.

Yesterday Megan and I had a bottle of a Gewürztaminer-Eiswein, a dessert wine. Most dessert wines are slightly higher in alcohol than their mainstream counterparts. Also, usually the prefix Eis- (German for ice) means a form of freeze distillation where you chill your fermented beverage, and remove the ice (the water will freeze out of solution), leaving a higher percentage of alcohol and more intense flavors left in the wine/beer.

This particular Eiswein introduced me to a new concept in the world of Eis-. It was 7% ABV and very sweet. My guess is that they started fermentation in the Gewürztaminer, taking periodic Brix measurements, and at a certain point (with quite a bit of fermentation still left),  chilled the wine to kill the yeast. This would leave a slightly alcoholic wine, with quite a bit of fermentable sugars left over, making it very sweet.

I may have to try this sometime, it was quite delicious.

Also on my list of wines to make is a port, as I am a big fan of them. Port wines (Vinho de Porto) are from Portugal, and can be described as "fortified wines." A particular grape harvest is used in two ways:

1) The grapes are made into a wine, and then distilled into a grape brandy (note that this is always done with the same grapes)

2) A second wine is made, and as above with the Eiswein, readings are made, and a a certain sugar content, the grape brandy is added. The high alcohol content in the brandy is too much for the yeast, so it stops fermentation at that point. The wine can be sweeter or drier depending on when this step occurs.

This is a simplistic description of the making of port wine, I'll get more into it as I get closer to making my own, specifically the differences between Tawny ports and Ruby ports, late bottle vintages and much much more.

Tuesday, February 8, 2011

Environmental Protection Ale

So a while back, my girlfriend applied for a research grant from the EPA for a grad school fellowship. At the time, I brewed a beer to commemorate that (guess what style, hyuck); it turned out pretty successful, and became one of my flagship beers, I had the recipe set in extract, partial mash and all-grain, and came up with some pretty similar results across the board.

People would often ask me, "well, what does it have to do with the environment?" I would always have to laugh and say, "nothing at all."

At the time, I had never had an organic beer that tasted as good as a non-organic alternative in the same category, so I had no interest in brewing organic. However, in the interest of trying to make that beer a little more true to the name, I think I am going to try and dip my feet into the organic mash.

Briess malting out of Wisconsin, produces a wide range of excellent specialty malts, and has quite the organic selection. I like local, and I love Briess (for the most part). They supply all of the malts necessary for my recipe, except for brumalt (I used Gambrinus' Honey Malt), for which I will try to use real honey instead (I'm pretty sure all honey is organic, unless they pump steroids into each bee, I will have to research this).

Hops will be a challenge, there are a couple small organic hop growers in the US, but not nearly enough to make them very easily available. I may have to cave on this, I think I can be comfortable doing this, since organic beer didn't need to be made with organic hops (although I remember hearing that the USDA was thinking about eliminating hops from the allowable ingredients for organic beer, last fall. I'm not sure if that passed or not).

With regards to yeast, I am absolutely sure that I want to stay away from "organic," as I would be surprised to hear that many organic brewers use yeast that is not from lab conditions (I think organic would mean putting your unfermented wort in the woods, opening the top, and letting mother nature do her thing).

Either way, if it turns out, my stock recipe for a pale ale will indeed be more environment friendly. I'll post a recipe when I have one made up (or maybe once I think its not going to suck, I've got most of it down already).

Saturday, January 29, 2011

BierKrieg Pt 2

So, another batch of Stout Sprinter in the fermenter, OG rolled in around 1.098 this time. Also, the Omnium amber ale rolled in right at 1.055.

I took my time brewing today, with 3 gallon batches, I can pretty much run the mash off from the first one, clean out the tun and start in on the next one while the first is still boiling. If I had done that, I would have saved maybe 2 hours today, but I would have been working my butt off, trying to keep everything on time.

The Rye Pilsner from last week is in a diacetyl rest right now, having just been transferred to secondary. The gravity on that one is reading right on 1.010; I would like to think it would finish out a little more, but I guess with an attenuation rate of 70-74%, that's not bad. Only a little hint of diacetyl, but I've had that before with WYeast 2278, that's what the rest is for. Its got a bit of haze to it right now, I think it will finish out just fine, but since most of my lagers have been bocks, as opposed to piss-clear pilsners, maybe I just haven't seen it before.

Adjusting my recipes to the new brewhouse efficiency has been nice. The amber ale was exactly on target, and I mean exactly, not one or two points off. The Impy stout was a little low, but there is that gravity ceiling for all grain beers, and I'm right at it (some of the gravity points were from Belgian candi sugar, I know, that's kind of cheating)

I didn't get around to kegging my a batch that I have ready, I should really do that. I may get some new gaskets and give the kegs a facelift first.

I will finish this post, as I finish off a bottle of a well-brewed ESB of mine.

"You foam within our glasses, you lusty golden brew,
Whoever imbibes takes fire from you.
The young and the old sing your praises,
Here's to beer,
Here's to cheer,
Here's to beer!"

Wednesday, January 26, 2011

BierKrieg

I ended up brewing the Rye Pilsner as described in the previous post, and I have high expectations. Things went off without a hitch; my batch sparging efficiency was great, starting fermentation was great. I also used White Labs new(ish) Clarity Ferm, a clarifying agent that is meant to be added to the start of fermentation. I think I like it, but I guess I won't know until later. If I like this recipe, I'll brew up a 6 gallon batch, split it into two of my 3 gallon fermentors, one with it, one without.

On Saturday, many of us NB folk went out to St Cloud to help out with the new-this-year St Cloud Craft Beer Expo, which was a blast. It seems there was a need for a good quality beerfest/tasting event out there, as we sold out. My numbers may be wrong, but I seem to recall somewhere between 1000 and 1100 tickets were pre sold, and we sold out at the door at 2000 (I think). Guests were mixed between the St Cloud college types (wooo- endless beer!), and more refined folk tasting and discussing the various beverages. Either way, people got drunk and had a blast.

I'm planning a big brew day for this Saturday. I have been researching as much as I can into decoction brewing techniques, and I had originally planned to brew a triple decoction. I will give a brief description below, you can skip reading it if I say big words (its OK, my brain hurts sometimes too).

--Begin Beer Science Talk--

For those not in the know, decoction mashing was a technique used in ye olden tymes, before we figured out how to modify grains for easier starch extraction. Decoction mashing involves holding the mash (your milled grains with some heated water), at a certain temperature for a length of time, pulling the mash out, boiling it, and putting it back in with the rest of the mash to hold it at a higher temperature for a time. 

In addition to activating the enzymes (Glucanase, α-Amylase, β-Amylase, etc) to degrade the proteins necessary for fermentation, this method also slightly carmelizes the unfermented wort, bringing out some subtle (unsubtle if you do it wrong) nuances in your beer. 

We brewers don't use this method (much) anymore, because 2-row barley is much more modified, increasing the efficiency in starch extraction, making mash steps less important. Mash steps means more heat, and more time, that means your beer costs more, or your local brewer lives in a shanty.

--End Beer Science Talk--

I'm thinking I will postpone the decoction mash until I acquire more equipment, and take some more time to go over my intended recipe. Since I already set aside a big block of time this Saturday for brewing, I think I'll do 2 all grain batches instead.

A friend of mine asked me when I was going to brew my prized "Stout Sprinter" english style (kind of) imperial stout again. To put it in Mozart terms, this beer is my requiem. It has promise to be great, and I've had some already amazing incarnations of it, but I know it can be even better. I've left it alone for some time now, in order to rest myself, and ponder where to take it next, but after a little prodding, I'm ready to try it again. A 3 gallon of that is beer #1.

Next, after thinking about what a moron I was with my "Amber" ale a few weeks back (hey, it was a while since I brewed last, I needed to dust the cobwebs out somehow), I tasted that, and now have my bearing on exactly where I want to go, that is beer #2. I think I'll do a 3 gallon of that too, so I don't end up with fountains of beer everywhere (Side note, I need more thirsty, adventurous friends).

2 mashes, 1 day, that will be my BierKrieg (or maybe Blitzbier is more appropriate, but it just doesn't have the same ring)